DD-2000 type

DD-2000 spray paint room configuration table
Outer diameter of atrial body
7000× 5400× 3300mm (L× W× H)
Inner diameter of the body
6900× 3900× 2500mm (L× W× H)
Big       door
 
1, without sheetmetal metal door, made of steel plate and built-in frame with external protective film, beautiful and durable, square self locking aluminum alloy view.
      inspection window, special plug for sheet metal door, square tube guide column and aluminum alloy hinge.
2, sealed slot box with special sealant;
3, the doorway: 3000× 2480mm (W× H);.
Working door
1 sets, 700× 1800mm (W× H), luxurious aluminum alloy edge, supporting pressure lock and glass observation window;
Room       body
1. The wall panels adopt the insert type composite plate, and the steel strips and seals are used to improve the compressive strength.
      improve corrosion resistance and rust resistance, prolong service life, thickness 50mm, inside and outside δ =0.4mm color steel plate;
2, internal filling: flame retardant foam;
3, the roof of the house is made of 0.8mm galvanized steel plate, which has excellent fire protection effect.
4, the housing frame is made of galvanized steel bending, and the sealing effect is good.
      station
1. The platform is made of galvanized steel sheet punching, machine pressing, molding and galvanized square pipe assembling, with high 300mm, installation specification, solid and durable.
2, the middle configuration two floor grille, three skateboards [or two grille, three skateboards], the structure is reasonable, durable.
3. Adopt mechanism press welding geogrid 30× 5 flat steel, ensure load bearing, galvanizing and rust treatment.
4, the bottom of the pattern plate is welded with reinforcing bars, and the operators are comfortable to operate.
Exhaust air
Line      
1. The fan box and the main building body are separated structures, greatly reducing the vibration of the housing.
2. The fan box is made of sprayed profiles and steel plates with external protective films to improve the rust resistance and prolong the service life.
3. The size of the fan box is 3000*1300*3200 (L*W*H), and the super wind box can fully meet the intake and exhaust requirements of the barn.
4, the high position air supply unit greatly improves the efficiency of fan air supply.
5, the air supply unit adopts 2 double inlet centrifugal fans. Fan model: YDW-4.5M; single power: 3KW;
6, the exhaust unit adopts 1 turbines single inlet high pressure fan. Fan model: DDF; single power: 5.5KW.
Exhaust pipe
Reference       number
1. The exhaust pipe is made up of flanges made of high quality galvanized steel sheet and professional equipment.
2, the total number of exhaust pipes: 2 straight pipes and 1 elbows.
heating system
Equipped with 8 sets of double doors luxury far infrared heater, each 3 tubes × 8=24 kilowatt, (East large barn special far-infrared lamp).
Filter system
1. Air inlet primary filtration, for Italy technical production, effectively capture more than 10um of dust particles.
2, top efficient filtration, for Holland technology production, can efficiently capture more than 4um dust particles, the capture rate up to ≥ 98%, embedded type cotton filter bracket (highly efficient, easy to replace filter cotton).
Lighting
The ceiling lamps are 8 sets of × 3 =24 branch × 16W, LED lamp tube, lamp tube transverse, illumination: ≥ 800LUX
Electronic control system
The luxury electric box has: time setting, temperature setting, painting, baking paint, lighting, power supply, emergency stop switch and so on.
No-load wind speed
≥ 0.3m/s
Electric       source
380V/3 phase /50HZ
Maximum temperature
55 degrees centigrade
Total power
37KW
      color
Optional: sea blue, scarlet, orange, white ash and so on.